Upgraded DFRobot Gravity Analog Electrical Conductivity Sensor/Meter V2 (K=1) Compatible with 3~5V arduino Raspberry Pi LattePanda for Water quality monitoring Aquaculture Hydroponic Aquaponic
DFRobot Gravity: analog electrical conductivity meter V2 is specially used to measure the electrical conductivity of aqueous solution, and then to evaluate the water quality, which is often used in water culture, aquaculture, environmental water detection and other fields.
This product, as an upgraded version of electrical conductivity meter V1, greatly improves the user experience and data precision. It supports 3~5v wide voltage input, and is compatible with 5V and 3.3V main control board; The output signal filtered by hardware has low jitters; The excitation source adopts AC signal, which effectively reduces the polarization effect, improves the precision and prolongs the life of the probe; The software library uses two-point calibration method, and can automatically identify standard buffer solution, so simple and convenient.
With this product, main control board (such as Arduino) and the software library, you can quickly build an electrical conductivity meter, plug and play, no welding. DFRobot provides a variety of water quality sensor products, uniform size and interface, not only meet the needs of various water quality testing, but also suitable for the DIY of multi-parameter water quality tester.
Conductivity is the reciprocal of the resistance, which is related to the ability of the material to carry the current. In the liquid, the reciprocal of the resistance, the conductivity, is the measure of its ability to conduct electricity. Conductivity is an important parameter of water quality. It can reflect the extent of electrolytes present in water.
Tips: In order to ensure the measurement accuracy, it is strongly recommended to add a temperature sensor to measure the temperature, and achieve automatic temperature compensation. DS18B20 waterproof temperature sensor can also be used.
Note: 1. It does not include the Waterproof DS18B20 Sensor Kit after the product is upgraded.
2. Because this product contains a small amount of liquid, it will be shipped via more stringent channels, such as Singapore Post etc.
Arduino Connection Diagram
Arduino Connection Diagram With Waterproof DS18B20 Sensor
1.The probe is a laboratory-grade probe. Do not immerse in liquid for a long time. Otherwise this will shorten the life of the probe.
2.Platinum black layer is attached to the surface of the sheet metal in the probe.It should avoid any object touching it. It can only be washed with distilled water, otherwise the platinum black layer will be damaged, resulting in inaccurate measurement.
3.0~5.0V wide voltage input
Hardware filtered output signal, low jitter
AC excitation source, effectively reduce polarization
Gravity connector and BNC connector, plug and play, no welding
Software library supports two-point calibration, and automatically identifies standard buffer solution, integrates temperature compensation algorithm
Uniform size and connector, convenient for the design of mechanical structures
Water quality monitoring.
Hydroponic & Aquaponic.
Signal Conversion Board (Transmitter) V2
Supply Voltage: 3.0~5.0V
Output Voltage: 0~3.4V
Probe Connector: BNC
Signal Connector: PH2.0-3Pin
Measurement Accuracy: ±5% F.S.
Board size: 42mm*32mm/1.65in*1.26in
Electrical Conductivity Probe
Probe Type: Laboratory Grade
Cell Constant: 1.0
Support Detection Range: 0~20ms/cm
Recommended Detection Range: 1~15ms/cm
Temperature Range: 0~40°C
Probe Life: >0.5 year (depending on frequency of use)
Cable Length: 100cm
Product WiKi: //www.dfrobot.com/wiki/index.php/Gravity:_Analog_Electrical_Conductivity_Sensor_/_Meter_V2_(K%3D1)_SKU:DFR0300
More Documents: //www.dfrobot.com/wiki/index.php/Gravity:_Analog_Electrical_Conductivity_Sensor_/_Meter_V2_(K%3D1)_SKU:DFR0300#More_Documents
Electrical Conductivity Probe（K=1,Laboratory Grade） x1
Signal Conversion Board (Transmitter) V2 x1
Standard Buffer Solution 1413us/cm x2
Standard Buffer Solution 12.88ms/cm x2
Gravity Analog Sensor Cable x1
Waterproof Gasket x2
Screw Cap for BNC Connector x1
M3 * 10 nylon pillar x4
M3 * 5 screw x8
Payment & Shipment
We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.
We will process most order in 48 hours after payment verification and offer tracking no with every Deal(aliexpress only can fill the tracking No after 24 hours).
Support WORLDWIDE SHIPPING. (Except some countries and APO/FPO).
DHL/Fedex Tracking No Maybe Change after the item arrive Hongkong(eg.we shipped the item on Friday and fill the tracking No,but the tracking No may be Change on Monday if the Parcel arrive Hongkong).
SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
If you have not received your shipment within reasonable days from payment, please contact us first(pls don't put negative feedback before contact us!). We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
If The total amount of orders are less than $2, We can only shipped by China Post Ordinary Small Packet Plus!
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important ,We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
It is impossible to address issues if we do not know about them!
For Russian buyer,pls offer full name as policy requires.
For Buyer from Russian Federation,Argentina,Ukraine,Item may ship via China Post Registered Air Mail, Singapore Post, EMS if you choose DHL/Fedex as complex customs declaration process.
For Buyer From Brazil, pls offer Tax No is you want to ship via DHL/Fedex,or item will ship via EMS though you choose DHL.